No need for an adapter! Just install the mount under the eave, level the pole, and click the Starlink dish into the mount. The mount fits under most eaves (30" of clearance). Includes lag screws and wire clips for an easy installation.
Satellite Oasis
Satellite Oasis
Satellite Oasis
The mast and wall bracket are very cleverly designed providing a great range of adjustability. This was able to be completely installed in an afternoon by myself. However, I must note the issues. First off the telescopic support arms could be a few inches longer. I originally wanted to have the arms fixed to the vertical portion of the mast and mounted to the adjacent studs (16" spacing) from the stud the mast was fixed to. This mounting possibility is illustrated in the instructions (Right side, step 5). However, after mounting the mast and locating the adjacent studs I discovered that the arms will not reach. I had to move the arms to the 45 degree portion of the mast to be able to reach. Not a big deal, however had I known this I could have mounted the whole thing 6-12" higher up the wall. Next issue I ran into was the 3D printed adapter's top surface was too tall and the clip detent on the dish would not snap in. I had to sand off at least 1 print layer to get the dish to seat properly for its detent to engage. Overall, it will work if you are willing to get creative to make it work.
